Solarium Product is Manufactured with Easy to Clean Properties
For General Care: Brush off loose dirt and gently hose down.
For Stubborn Stains: Prepare a solution of 1 cup of bleach and 1⁄4 cup of mild soap (such as Woolite or Dawn dishwashing liquid) per gallon of clean water. The solution should be sprayed on (do not soak) the face of fabric and gently brush. Do not keep the solution on the fabric for more than 2 minutes before rinsing with cool water.
If it is Fortress Indoor/Outdoor Performance Fabric...
For Normal Stains:
Remove any loose dirt. Prepare a mixture of cold to lukewarm water (do not exceed 100° F) and mild soap. Rub in mixture with a soft brush and allow the mixture to thoroughly soak into the fabric. Rinse well with water and air dry. Do not machine dry.
For Stubborn Stains:
Remove as much surface dirt as possible. Soak fabric for 1 hour in a mixture of 1 gallon cold water, 1/2 cup bleach, and 1/2 cup mild soap. Rub in mixture with a soft brush and rinse thoroughly with cold to lukewarm water and air-dry. Never use water over 100 degrees Fahrenheit. Do not machine dry. Detergents can be used on Fortress Performance Indoor/Outdoor without harm; it may however remove some of the water and stain resistant properties. If this is important to you, a simple spraying of a post cure fluorocarbon will restore these properties. Please follow the instructions on the package. These sprays can be obtained through a dry cleaning supply store or stores that sell marine related products.